4
Parts Replacement and Cleaning > Image Formation System > Removing the Main Drive Unit > Preparations
5) Pull out the toner container.
CAUTION:
At installation, make sure to insert the Toner Container all the way in and close the
small cover.
4
Parts Replacement and Cleaning > Image Formation System > Removing the Main Drive Unit > Preparations
F-4-216
F-4-217
Removing the Main Drive Unit
■ Preparations
1) Open the Right Lower Cover and Right Upper Cover.
2) Remove the Right Rear Cover.
3) Remove the Left Rear Cover and the Left Rear Sub Cover.
4) Remove the Connector Cover.
• 1 screw
5) When the Cassette Pedestal is installed, remove the connector.
• 5 connectors
• 6 harness guides
Connectors
x6
x5
4-127
F-4-218
Harness guides
F-4-219
4-127