Canon imageRUNNER ADVANCE C5051 Series Service Manual page 869

COPIER > OPTION > FNC-SW
BXNUPLOG ON/OFF of Nup log at Inbox print
Lv.2 Details To set whether to keep Nup log at Inbox print.
Use case When keeping Nup log at Inbox print
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
BUSI-SW Setting of customized function
Lv.1 Details To set the function in accordance with the customized specification.
Use case When installing the customized machine
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Standard, 1: Customization
Default value 0
SDLMTWRN ON/OFF cpcty warn dspl: E-mail/I-Fax TX
Lv.1 Details To set whether to display the warning message when sending data
that exceeds the upper limit value for the transmission data size via
E-mail/I-Fax.
Use case For customization
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
JLK-PWSC ON/OFF of PCAM password auth doc scan
Lv.2 Details To set whether to scan the PCAM password authentication document
with the MEAP application.
Use case When scanning the PCAM password authentication document
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
ATUDILOG ON/OFF of UDI log record
Lv.2 Details To set ON/OFF of UDI log record mode.
UDI log file is normally written in HDD file, but it is deleted at start-up
so the UDI log is not recorded.
When 1 is set, UDI log is recorded in HDD at job assignment, and is
written out with sub log when obtaining it with USB memory (it can
be also obtained from SST).
Use case When investigation is not possible with only sub log at the time of
problem occurrence
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to get approval from the user by telling that third party other
than Canon cannot recover the original document and image from
UDI log.
Display/adj/set range 0 to 2
0: OFF, 1: ON, 2: Not used
Default value 0
FAX-INT Set FAX RX print interruption oprtn mode
Lv.2 Details To set the mode performing interruption operation of FAX reception
print automatically.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Normal, 1: Interruption operation mode
Default value 0
PDL-Z-LG Setting of drawing algorithm
Lv.1 Details To switch the drawing algorithm of the iR C series and the iR-ADV C
series to obtain output the user expects.
When 0 is set, image is output as displayed on the screen by the
new algorithm adopted from the iR-ADV C Series. Pseudo outline
(boundary for processing divided graphics separately) occurred with
the iR C series does not occur. However, when PDL job with special
data structure is sent, output the user expects may not be obtained.
When 1 is set, the drawing algorithm adopted by the conventional iR
C series is used. Output equivalent to that of the iR C Series can be
obtained; however, drawing-related phenomenon occurred with the
series occurs.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use setting value 2 and 3.
Display/adj/set range 0 to 3
0: Drawing algorithm of iR-ADV C series, 1: Drawing algorithm of the
conventional iR C series, 2, 3: For R&D use
Default value 0
8-169
8-169