4
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (Bk) > Procedure
Removing the Hopper (Bk)
■ Preparations
1) Release the lock of Toner Container (By service mode).
2) Open the Front Cover, the Right Lower Cover and Right Upper Cover.
3) Remove the ITB Unit.
4) Remove the Process Unit.
5) Remove the Color Drum Heater (When the option is installed).
6) Remove the Drum Heater (Bk).
7) Remove the Toner Container Front Inner Cover.
8) Remove the Hopper (C).
■ Procedure
1) Remove the Harness from the Fixing Guide.
Harness
Guide
2) Remove all the Toner Trays.
• 3 screws (M4 binding)
x3
4
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (Bk) > Procedure
3) Remove the Duct Sheet.
• 2 screws (binding)
4) Remove the Hopper Unit.
• 1 connector
• 1 wire saddle
• 6 screws (RS)
• 3 fixing guides
F-4-260
F-4-261
x2
Connector
x2
x4
4-139
F-4-262
Wire saddle
x3
Fixed guide
F-4-263
4-139