Canon imageRUNNER ADVANCE C5051 Series Service Manual page 342

4
Parts Replacement and Cleaning > Main Controller > Removing the AC Driver > Procedure
3) Pull out the Main Power Unit.
• 3 connectors
• 3 screws
Connectors
x3
x3
Screw
4) Remove the Main Power Unit.
• 14 connectors
• 5 wire saddles
Connector
12 Connectors
x14
x5
Wire saddles
Connector
Main power unit
Wire saddles
4 Parts Replacement and Cleaning > Main Controller > Removing the AC Driver > Procedure
Main power unit
Screw
Screw
F-4-73
Removing the AC Driver
■ Preparations
1) Open the Right Lower Cover and Right Upper Cover.
2) Remove the Right Rear Cover.
3) Remove the Left Rear Cover and Left Rear Sub Cover.
4) Remove the Rear Cover.
5) Remove the Rear Lower Cover.
■ Procedure
1) Remove all the connector on the PCB and remove the AC Driver.
• 6 wire saddles
• 13 connectors (12 pieces for overseas model)
• 3 screws
Wire saddles
x6
x13
Screw
x3
Wire saddles
F-4-74
Screw
AC Driver
13 Connectors
Screw
4-76
F-4-75
4-76