Canon imageRUNNER ADVANCE C5051 Series Service Manual page 870

COPIER > OPTION > FNC-SW
CDS-LVUP Set to allow CDS periodical update
Lv.1 Details To set whether to allow the user (administrator) to use the periodical
update function linked with CDS.
When 1 is set, the periodical update function can be used from user
mode.
Use case When allowing the user to use the periodical update function
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not set 1 in Japan. The firmware cannot be updated by user.
Display/adj/set range 0 to1
0: Disabled, 1: Enabled
Default value The value differs according to the location.
UA-OFFSW ON/OFF of unified auth function
Lv.1 Details To set ON/OFF of the Unified Authentication function.
Set the value to 0 when not preferring to use the Unified
Authentication function because of security concern.
Use case Upon user's request (not to use the Unified Authentication function)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0
MIB-NVTA RFC-compatible character stringMIB write
Lv.1 Details As default, MIB object which NVT-ASCII can be written exists in
order to link with LUI entry value. This violates RFC order, so a
problem like garbled 2-byte characters may occur in the SNMP
monitoring system, such as the 3rd vendor's MPS.
Whether non-RFC-compatible character strings are written in MIB
can be set using this mode.
When 1 is set, only the character strings which are strictly compatible
with RFC are written. (Writing operation is executed from the SNMP
manager.) LUI is not linked.
Use case Upon user's request (operation with RFC-compatible system)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Compatible in a conventional manner, 1: RFC-compatible, 2 to 3:
Not used
Default value 0
MIB-EXT [Not used]
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
SVC-RUI Enabling of RUI function for servicing
Lv.1 Details To set whether to enable the RUI function for servicing (not provided
to end users).
When 0 is set, the RUI function is disabled.
When setting the value other than 0, RUI function is enabled. The
value entered becomes password to use the RUI function.
The data is cleared after the main power switch is turned OFF/ON.
Use case When preferring to use the import function of background image file
of main menu
Adj/set/operate method Enter the setting value, and then press OK key.
The data is cleared after the main power switch is turned OFF/ON.
Display/adj/set range 0 to 65535
Default value 0
LCDSFLG Enabling of local CDS server
Lv.1 Details To set whether to use the local CDS server.
When CDSFIRM is 1, this setting is enabled.
Use case When using the local CDS server
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When CDSFIRM is 1, this setting is enabled.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
Related service mode COPIER > OPTION > FNC-SW > CDSFIRM
BXSHIFT Setting of binding at 0mm binding margin
Lv.1 Details To set whether to judge the job as a job "without binding" when
storing a PDL job in Inbox while the binding margin is set to "0".
By setting the binding margin to 0 mm while "0" is set, the job is
processed as "without binding". "Booklet" in "Options" on the Inbox
screen can be also used.When "1" is set, it is judged as "with
binding" even the binding margin is 0 mm so "Booklet", which has an
exclusive relationship with "binding", cannot be used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When storing a PDL job in Inbox while 1 is set, "Booklet" in "Options"
on the Inbox screen cannot be used.
Display/adj/set range 0 to 1
0: Without binding, 1: With binding
Default value 0
8-170
8-170