Canon imageRUNNER ADVANCE C5051 Series Service Manual page 790
Hide thumbs
Also See for imageRUNNER ADVANCE C5051 Series:
- Getting started (252 pages) ,
- Maintenance manual (160 pages) ,
- User manual (152 pages)
Advertisement
COPIER > ADJUST > CCD
DFCH-R10
Complex chart No.10 data (R) [Back side]
Lv.1 Details
To derive the front/back side linearity, set the Red data (for paper
back) of No.10 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 2550
Default value
0
Related service mode
COPIER> ADJUST> CCD> DFCH-R2, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
DFCH-B2
Complex chart No.2 data (B) [Back side]
Lv.1 Details
To derive the front/back side linearity, set the Blue data (for paper
back) of No.2 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 2550
Default value
2000
Related service mode
COPIER> ADJUST> CCD> DFCH-R10, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
DFCH-B10
Complex chart No.10 data (B) [Back side]
Lv.1 Details
To derive the front/back side linearity, set the Blue data (for paper
back) of No.10 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 2550
Default value
0
Related service mode
COPIER> ADJUST> CCD> DFCH-R2, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
8
Service Mode > COPIER > ADJUST > CCD
8
Service Mode > COPIER > ADJUST > CCD
COPIER > ADJUST > CCD
DFCH-G2
Complex chart No.2 data (G) [Back side]
Lv.1 Details
To derive the front/back side linearity, set the Green data (for paper
back) of No.2 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 2550
Default value
2000
Related service mode
COPIER> ADJUST> CCD> DFCH-R10, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
DFCH-G10
Complex chart No.10 data (G) [Back side]
Lv.1 Details
To derive the front/back side linearity, set the Green data (for paper
back) of No.10 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 2550
Default value
0
Related service mode
COPIER> ADJUST> CCD> DFCH-R2, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
MTF2-M10
MTF value 10 setting: horz scan [Front]
Lv.1 Details
Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
20 to 85
Default value
50
Related service mode
COPIER> FUNCTION> CCD> MTF-CLC
MTF2-M11
MTF value 11 setting: horz scan [Front]
Lv.1 Details
Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case
When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
20 to 85
Default value
50
Related service mode
COPIER> FUNCTION> CCD> MTF-CLC
8-90
8-90
Advertisement
