Canon imageRUNNER ADVANCE C5051 Series Service Manual page 918

COPIER > OPTION > USER
STPL-MAX Set of max number of sheets for staple
Lv.2 Details To set the maximum number of sheets to be stapled in the Finisher.
When "1: 60 sheets" is set, the stapling capacity becomes 60 sheets.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: 50 sheets, 1: 60 sheets
Default value 0
USBK-DSP ON/OFF user mode item for USB keyboard
Lv.2 Details [Not Used] To set ON/OFF of "Use MEAP Driver for USB Input
Device" display in user mode.
When using the USB keyboard, it is necessary to specify either of
the followings for USB keyboard. (It is not possible to use the USB
keyboard for both.)
- Use the keyboard for some MEAP applications which
independently support the USB keyboard (including Card Reader of
the keyboard emulator type).
- Use the keyboard for MEAP applications which do not support the
LUI and USB keyboard.
When "1: ON" is set, user mode items are enabled, and the settings
to use the USB keyboard for the LUI and MEAP applications
become available. Meanwhile, there is a possibility that the MEAP
applications which support the USB keyboard (including Card
Reader of the USB emulation type) might not operate.
Use case When using the USB keyboard for the MEAP applications which do
not support the LUI and the USB keyboard for customization etc.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this setting except for customization.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related user mode Preferences> External Interface> USB Settings> Use MEAP Driver
for USB Input Device
SCALL-SW Display/hide of Service Call button
Lv.1 Details [Not used] (for expansion)
To set whether to display or hide the Service Call button on the
Control Panel.
Use case When the sales company supports service initiated by the Service
Call button
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
SCALLCMP Set of repair request complete notice
Lv.1 Details [Not used] (for expansion)
With this setting enabled, a notification of repair completion is sent
to UGW server to clear the repair-request status that is retained
internally.
Use case When service technician uses this mode after completing repair
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
Default value 0
USBH-DSP Display/hide of "Use USB Host"
Lv.2 Details To set whether to display "Preferences> External Interface> USB
Settings> Use USB Host".
By selecting "1: Display", whether to use USB host on USB Settings
screen can be selected.
Use case When switching to display or hide "Use USB Host" on USB Settings
screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
USBM-DSP Dspl/hide of USB ex-memory device driver
Lv.2 Details To set whether to display "Preferences> External Interface> USB
Settings> Use MEAP Driver for External USB Device".
By selecting "0: Hide", the item is not displayed, and the user
administrator cannot change the setting of the MEAP driver for the
USB external memory device.
Use case When prohibiting the user administrator to change the setting of
"Use MEAP Driver for USB External Device", set 0 after the specified
setting is completed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
8-218
8-218