Canon imageRUNNER ADVANCE C5051 Series Service Manual page 403

4
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (C) > Procedure
3) Remove the Harness Guide.
• 2 screws (RS)
x2
4) Remove the Hopper Upper Stay.
• 3 screws (RS)
x3
5) Remove the Secondary Delivery Duct.
• 2 screws (P tight)
x2
4 Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (C) > Procedure
6) Remove the rail Retaining Plate.
• 4 screws (M4 binding)
F-4-251
7) Remove the Toner Tray.
• 1 screw (M4 binding)
F-4-252
8) While avoiding the Duct Sheet, remove the Hopper Unit.
• 1 connector
• 1 wire saddle
• 5 screws (RS)
F-4-253
x4
Hopper Unit
x3
x2
Duct sheet
4-137
F-4-254
F-4-255
Connector
Wire saddle
F-4-256
4-137