Canon imageRUNNER ADVANCE C5051 Series Service Manual page 222

2
Technology■>■Embedded■RDS■>■E-RDS■Setup■>■Steps■to■E-RDS■settings
6.■Touch■the■numeric■button■[1]■on■the■control■panel■(the■setting■value■is■changed■to■1)■and■
touch■the■[OK]■button.■(The■data■is■reflected■to■the■setting■value■field.)
NOTE:
This■operation■enables■the■communication■function■with■UGW.
CAUTION:
The■following■settings■i.e.■RGW-PORT■and■RGW-ADR■in■Service■mode■must■not■be■
change■unless■there■are■specific■instructions■to■do■so.
Changing■these■values■will■cause■error■in■communication■with■UGW.
2 Technology■>■Embedded■RDS■>■E-RDS■Setup■>■Steps■to■E-RDS■settings
7.■Select■[COM-TEST]■and■then■touch■[OK].
NOTE:
This■initiates■the■communication■test■between■the■device■and■the■UGW.
F-2-311
If■the■communication■is■successful,■"OK!"■is■displayed.■If■"NG!"■(failed)■appears,■refer■to■the■
"Troubleshooting"■and■repeat■until■"OK!"■is■displayed.
NOTE:
The■communication■results■with■UGW■can■be■distinguished■by■referring■to■the■COM-
LOG.■By■performing■the■communication■test■with■UGW,■E-RDS■acquires■schedule■
information■and■starts■monitoring■and■meter■reads■operation.
2-186
F-2-312
F-2-313
2-186