Canon imageRUNNER ADVANCE C5051 Series Service Manual page 34

1
Product Overvew > Operation > Service Mode > Enhancement of I/O information
■ Enhancement of I/O information
This mode is to check the signal input / output status of used electrical parts (sensor / motor /
fan etc.).
Searchability for target electrical parts has been improved in COPIER > I / O.
In addition, it is possible to check the signal input / output status on a screen.
1 Product Overvew > Operation > Service Mode > Enhancement of I/O information
Device classification
Electrical parts
classification
1) Press the button.
Which button to press, will depend on which
electrical parts intended and its device
classification. For instance, if the host
machine uses paper pass detection sensor,
then press the button on the "COPIER" and
"P-Sensor" position.
2) Then the selected electrical
parts classification's mark,
name, port number and 0/1
content will appear.
3) If the "i" button is pressed,
the screen displaying the
electrical parts array will appear.
1-18
F-1-14
1-18