4
Parts Replacement and Cleaning > Image Formation System > Pulling Out the Process Unit > Procedure
2) Turn the ITB Pressure Release Lever in the right direction and release the pressure.
CAUTION:
When releasing the pressure of ITB Pressure Release Lever, make sure that the
protrusion of grip is aligned with the triangle mark of plate.
ITB pressure release lever
3) Pull out the Process Unit until it stops.
• 2 screws
x2
4
Parts Replacement and Cleaning > Image Formation System > Pulling Out the Process Unit > Procedure
4) Place the paper onto the Process Unit to protect the Drum Unit from the light.
F-4-165
F-4-166
4-111
Paper
F-4-167
4-111