Canon imageRUNNER ADVANCE C5051 Series Service Manual page 909

COPIER > OPTION > USER
OP-SZ-DT Orgnl size dtct ON/OFF at copyboard open
Lv.2 Details To set ON/OFF of original size detection while the Copyboard is
opened.
When "0: OFF" is set, enter original size manually from the Control
Panel.
When "1: ON" is set, original size is detected automatically.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
NW-SCAN Setting of network scan function usage
Lv.2 Details To set whether to allow use of network scan function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not change this mode in Japan.
- For PS/PCL machines for overseas (outside Japan), fix the setting
value as "1: Enabled". For others, permit the use.
Display/adj/set range 0 to1
0: Disabled, 1: Enabled
Default value 1
HDCR-DSP Setting of HDD complete delete method
Lv.2 Details To set data deletion method of HDD data complete deletion function.
Use case When switching the deletion method in HDD data complete deletion
mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 4
1: 1-time deletion with 0 data, 2: 1-time deletion with random data, 3:
3-time deletion with random data, 4: DOD (1st time: a series of fixed
values, 2nd time: a series of complement of fixed values, 3rd time:
random data)
Default value 1
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
JOB-INVL Job intvl setting at interruption copy
Lv.2 Details To set output interval between jobs at the time of interruption copy.
Sorting is difficult after interruption copy because of the continuous
output of the next job. Paper interval becomes longer when starting
pickup for the next job after the last sheet of the previous job is
delivered.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Continuous output of the interruption copy and the next job
1: Starting pickup for the next job after the interruption copy is
delivered all.
2: Starting pickup for the next job after the previous job is delivered
all. (For all jobs)
Default value 0
LGSW-DSP ON/OFF of "Log display ON/OFF setting"
Lv.2 Details [Not used] To set whether to display "Management Settings> Device
Management> Display Log" in user mode.
When "1: ON" is set, "Display Log" is displayed in the "Device
Management" screen. When ON is set, the logs of each job are
displayed in "System Status."
When "0: OFF" is set, "Display Log" is not displayed in the "Device
Management" screen, and the logs of each job are not displayed
either.
Display/adj/set range 0 to 1
0: OFF, 1: ON
TAB-ROT Set of landscape img rotn at PDL:tab ppr
Lv.1 Details To set whether to rotate landscape image by 180 degrees when PDL
print is made on tab paper.
When "1: Rotated" is set, image is rotated.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not rotated, 1: Rotated
Default value 0
8-209
8-209