Canon imageRUNNER ADVANCE C5051 Series Service Manual page 959

FEEDER > FUNCTION
MTR-ON Operation check of Motor
Lv.1 Details To start operation check of the motor specified by MTR-CHK.
Use case At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
The unit operates for approximately 5 seconds and automatically
stops.
2) Press OK key.
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Display/adj/set range None
Related service mode FEEDER> FUNCTION> MTR-CHK
ROLL-CLN Rotation of DADF Rollers
Lv.1 Details To rotate the DADF Rollers for cleaning.
Clean the roller with lint-free paper moistened with alcohol while it is
rotating.
Use case At roller cleaning
Adj/set/operate method 1) Select the item, and then press OK key.
2) Clean the rotating rollers with lint-free paper moistened with
alcohol.
3) Press OK key.
The rollers stop.
Display/adj/set range None
FEED-ON Operation check of DADF individual feed
Lv.1 Details To start operation check of the feed mode specified by FEED-CHK.
Use case At operation check
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range None
Related service mode FEEDER> FUNCTION> FEED-CHK
CL-CHK Specification of operation Clutch
Lv.1 Details To specify the clutch to operate.
Use case When replacing the Clutch/checking the operation
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 1
0:Pickup clutch(ADF),
1:Registration clutch(ADF)
Related service mode FEEDER> FUNCTION> CL-ON
8
Service Mode > FEEDER > FUNCTION
T-8-82
8 Service Mode > FEEDER > FUNCTION
8-259
8-259