Removing The Rear Cover; Removing The Optics-Side Cover - Christie Boxer 4K Series Service Manual

Removing the rear cover

The rear cover provides access to lamp and lamp driver modules.
Estimated replacement time: 1 minute
1. Loosen the six captive screws securing the rear cover.
2. Remove the rear cover.
3. If required, replace the rear cover.
4. Regulary clean the steel mesh shield when servicing the rear cover.
5. To install the rear cover, repeat these steps in reverse order.

Removing the optics-side cover

The optics-side cover provides access to liquid cooling module, integrator focus module, zoom/focus
module, NFC readers, and other components.
Estimated replacement time: 1 minute
1. Loosen the six captive screws securing the optics-side cover.
2. Remove the optics-side cover.
3. If required, replace the optics-side cover.
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector covers and feet
35