Removing the touch panel
The touch panel is a touch-sensitive screen used to control the projector, manage sources, adjust the
display, and view status information.
1. Disconnect all harnesses from the card cage input panel.
2. Loosen the clamp knob.
3. Remove the touch panel from the projector.
4. If required, replace the touch panel.
5. To install the touch panel, repeat these steps in reverse order.
Removing the rear cover
Removing the rear cover provides access to the power supplies and other components allowing
removal of the integrator assembly.
1. Loosen the six captive screws securing the rear cover.
2. Remove the rear cover.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector covers and feet
40