Removing the rear cover
The rear cover provides access to the power supplies and other components allowing removal of the
integrator assembly.
1. Loosen the six captive screws securing the rear cover.
2. Remove the rear cover.
Removing the electronics-side cover
The electronics-side cover provides access to the card cage.
1. Loosen the four captive screws securing the electronics-side cover.
Replacing the CP4325-RGB Coupling Elbow Instruction Sheet
020-102890-01 Rev. 1 (07-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Replacing the CP4325-RGB coupling elbow
5