Removing the rear cover
To remove the rear cover, complete the following steps.
1. Remove the top cover.
See
Removing the top cover
2. Remove the three M3 screws securing the fuse holder.
3. Loosen the five captive M3 screws securing the rear cover module.
4. Unplug the two cables.
5. Replace the rear cover.
6. To re-install, follow these steps in reverse order.
Removing the front cover
To remove the front cover, complete the following steps.
1. Remove the top cover.
See
Removing the top cover
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
on page 57.
on page 57.
Projector covers and feet
58