Field
State
display l2tp tunnel
Use display l2tp tunnel to display information about L2TP tunnels.
Syntax
display l2tp tunnel [ statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
statistics: Displays statistics for L2TP tunnels.
Examples
# Display statistics for L2TP tunnels.
<Sysname> display l2tp tunnel statistics
Total number of tunnels: 11
# Display information about L2TP tunnels.
<Sysname> display l2tp tunnel
LocalTID RemoteTID State
10878
21
Table 10 Command output
Field
LocalTID
RemoteTID
State
Description
Session state:
•
•
•
•
•
Sessions RemoteAddress
Established
1
Description
Local tunnel ID.
Remote tunnel ID.
Tunnel state:
•
Idle.
•
Wait-reply.
•
Wait-connect.
•
Established.
•
Stopping.
Idle.
Wait-tunnel—Waits for the tunnel to be established.
Wait-reply—Waits for an Incoming-Call-Reply (ICRP)
message indicating the call is accepted.
Wait-connect—Waits for an Incoming-Call-Connected (ICCN)
message.
Established.
20.1.1.2
46
RemotePort RemoteName
1701
lns