H3C MSR Series Command Reference Manual page 121

Field
Mobile Country Code (MCC)
Mobile Network Code
(MNC)
Location Area Code (LAC)
Cell ID
Current Band
Current RSSI
PIN Verification
PIN Status
Number of Retries remaining
SIM Status
# Display the call connection information on Cellular 0/0 (TD-SCDMA network).
<Sysname> display cellular 0/0
Cellular0/0:
Hardware Information:
Model: ET128
Modem Firmware Version: 11.101.01.08.00
Hardware Version:
International Mobile Subscriber Identity (IMSI): 460079011105842
International Mobile Equipment Identity (IMEI): 860039002369111
Factory Serial Number (FSN):
Modem Status: Online
Profile Information:
Profile 1: Active
PDP Type: IPv4, Header Compression: Off
Data Compression: Off
Access Point Name (APN): cmnet
Description
The MCC is displayed if the modem has found the network. For example, the
MCC of Mainland China is 460.
The MNC is displayed if the modem is successfully registered with the network.
For example, the code of the GSM network of China Mobile is 00.
The LAC is displayed if the modem is successfully registered with the network.
The Cell ID is displayed if the modem is successfully registered with the network.
Current band selection mode:
•
GSM.
•
WCDMA.
•
ANY.
•
AUTO.
Current RSSI:
•
The RSSI ranges from –1 10 dBm to –51 dBm.
•
Unknown—No signal. The cellular interface is unavailable.
PIN authentication status:
•
Disabled.
•
Enabled.
•
Ready—The USIM/SIM card is normal and has no authentication requests.
•
PIN Requirement—The USIM/SIM card has PIN authentication requests.
•
PUK Requirement—The USIM/SIM card has PUK authentication requests.
Remaining PIN or PUK authentication request retries.
SIM card status:
•
OK—The SIM card is normal.
•
Network Reject—The SIM card is denied access to the network. The cellular
interface is unavailable.
•
Not Insert—The SIM card is absent. The cellular interface is unavailable.
CS31TCPU
GQ4CAB1942911350
112