PPPoE client commands
display pppoe-client session packet
Use display pppoe-client session packet to display the protocol packet statistics for a PPPoE session.
Syntax
display pppoe-client session packet [ dial-bundle-number number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dial-bundle-number number: Specifies the dialer bundle number corresponding to a PPPoE session, in
the range of 0 to 1023. If this option is not specified, this command displays the protocol packet statistics
for all PPPoE sessions.
Examples
# Display the protocol packet statistics for all PPPoE sessions.
<Sysname> display pppoe-client session packet
Bundle:
InPackets: 19
InBytes:
InDrops:
Bundle:
InPackets: 18
InBytes:
InDrops:
Table 5 Command output
Field
Bundle
Interface
InPackets
OutPackets
InBytes
OutBytes
InDrops
1
816
0
2
730
0
Interface:
Eth1/1
OutPackets: 19
OutBytes:
816
OutDrops:
0
Interface:
Eth1/1
OutPackets: 18
OutBytes:
730
OutDrops:
0
Description
Dialer bundle to which a PPPoE session belongs.
Ethernet interface where the PPPoE session is present.
Number of incoming packets.
Number of outgoing packets.
Number of bytes received.
Number of bytes transmitted.
Number of discarded incoming packets.
34