Ppp Mp Lfi Enable - H3C MSR Series Command Reference Manual

Views
MP-group interface view
Predefined user roles
network-admin
Parameters
time: Specifies the maximum LFI fragment transmission delay in the range of 1 to 1000 ms.
Examples
# Set the maximum LFI fragment transmission delay to 20 ms on interface MP-group 1.
<Sysname> system-view
[Sysname] interface mp-group 1
[Sysname-MP-group1] ppp mp lfi delay-per-frag 20
Related commands
•

ppp mp lfi enable

ppp mp lfi size-per-frag
•
ppp mp lfi enable
Use ppp mp lfi enable to enable LFI on an interface.
Use undo ppp mp lfi to restore the default.
Syntax
ppp mp lfi enable
undo ppp mp lfi enable
Default
LFI is disabled.
Views
MP-group interface view
Predefined user roles
network-admin
Usage guidelines
Disabling LFI also removes the user-configured settings of the maximum LFI fragment transmission delay
and size.
Examples
# Enable LFI on interface MP-group 1.
<Sysname> system-view
[Sysname] interface mp-group 1
[Sysname-MP-group1] ppp mp lfi enable
Related commands
ppp mp lfi delay-per-frag
•
ppp mp lfi size-per-frag
•
25