H3C MSR Series Command Reference Manual page 52

Routers. layer 2 - wan command (v7)
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Internet Address is 10.0.0.1/24 Primary
Link layer protocol: PPP
LCP: initial
Physical: L2TP
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 154 packets, 1880 bytes, 0 drops
Output: 155 packets, 1875 bytes, 0 drops
Table 7 Command output
Field
Current state
Line protocol state
Bandwidth
Hold timer
Internet Address
Link layer protocol
Physical
Last clearing of counters
Last 300 seconds input rate: 0 bytes/sec, 0
bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec,
0 bits/sec, 0 packets/sec
Input: 154 packets, 1880 bytes, 0 drops
Output: 155 packets, 1875 bytes, 0 drops
# Display summary information about virtual PPP interface Virtual-PPP 10.
<Sysname> display interface virtual-ppp 10 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Description
Physical state and administrative state of the virtual PPP interface:
Administratively DOWN—The interface is administratively
shut down by using the shutdown command.
DOWN—The interface is administratively up but physically
down.
UP—The interface is up both administratively and physically.
Link layer protocol state of the virtual PPP interface:
UP—The interface is up at the data link layer.
UP (spoofing)—The link layer protocol of an interface is UP,
but its link is an on-demand link or not present at all.
DOWN—The interface is down at the data link layer.
Intended bandwidth of the interface.
Interval in seconds for the interface to send keepalive packets.
IP address of the interface:
Internet protocol processing: disabled—No IP address is
configured, and the interface cannot process IP packets.
Primary—The IP address is the primary one of the interface.
Link layer protocol of the interface: PPP.
Physical type of the interface: L2TP.
Time when the interface statistics were last cleared. Never
indicates that the interface statistics have never been cleared.
Average rate of inbound traffic in the last 300 seconds.
Average rate of outbound traffic in the last 300 seconds.
Total number of inbound packets, total number of inbound bytes,
and total number of dropped inbound packets.
Total number of outbound packets, total number of outbound
bytes, and total number of dropped outbound packets.
43

Advertisement

Table of Contents
loading

Table of Contents