Isdn Carry Connected-Name; Isdn Crlength - H3C MSR Series Command Reference Manual

You can execute this command only if no call exists on an ISDN interface.
Examples
# Configure ISDN to include the calling-name field in outgoing packets on interface BRI 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn carry calling-name
Related commands

isdn carry connected-name

isdn carry connected-name
Use isdn carry connected-name to configure ISDN to include the connected-name field in outgoing
packets on an ISDN interface.
Use undo isdn carry connected-name to restore the default.
Syntax
isdn carry connected-name
undo isdn carry connected-name
Default
ISDN does not include the connected-name field in outgoing packets.
Views
ISDN interface view
Predefined user roles
network-admin
Usage guidelines
After you execute this command on the called party, the calling party can see the name of the called
party.
You can execute this command only if no call exists on an ISDN interface.
Examples
# Configure ISDN to include the connected-name field in outgoing packets on BRI 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn carry connected-name
Related commands
isdn carry calling-name

isdn crlength

Use isdn crlength to set length of the call reference used when a call is placed on an ISDN interface.
Use undo isdn crlength to restore the default length of the ISDN call reference on the interface.
76