<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0] isdn bri-slipwnd-size 7
Related commands
isdn pri-slipwnd-size
isdn caller-number
Use isdn caller-number to configure a permitted calling number for incoming calls.
Use undo isdn caller-number to delete the configured calling number.
Syntax
isdn caller-number caller-number
undo isdn caller-number
Default
ISDN accepts all incoming calls without checking the calling numbers in setup messages..
Views
ISDN interface view
Predefined user roles
network-admin
Parameters
caller-number: Specifies the calling number for an incoming call, a case-insensitive string of 1 to 24
characters.
Usage guidelines
If a setup message does not include a calling number or the calling number included is different from the
number that is configured through this command, the call fails.
Examples
# Configure BRI 2/0 to receive incoming calls only from calling number 400.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn caller-number 400
Related commands
isdn calling
isdn calling
Use isdn calling to have messages from a calling party to a called party carry the calling number.
Use undo isdn calling to delete the calling number in messages that a calling party transmitted.
Syntax
isdn calling calling-number
undo isdn calling
74