Interface Virtual-Template - H3C MSR Series Command Reference Manual

undo interface mp-group mp-number
Default
No MP-group interface is created.
Views
System view
Predefined user roles
network-admin
Parameters
mp-number: Specifies a number for the MP-group interface.
Usage guidelines
The interface mp-group command is used together with the ppp mp mp-group command. You can
execute the two commands in any order. If you assign an interface to an MP group and then create the
MP-group interface, you must execute the shutdown and undo shutdown commands on the MP-group
interface to validate the MP bundle.
Examples
# Create interface MP-group 3.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-MP-group3]

interface virtual-template

Use interface virtual-template to create a VT interface and enter its view. If the VT interface already exists,
you enter its view directly.
Use undo interface virtual-template to remove a VT interface.
Syntax
interface virtual-template number
undo interface virtual-template number
Default
No VT interface is created.
Views
System view
Predefined user roles
network-admin
Parameters
number: Specifies a VT interface by its number in the range of 0 to 1023.
22