Display Pppoe-Client Session Summary - H3C MSR Series Command Reference Manual

Field
OutDrops
Related commands
reset pppoe-client session packet

display pppoe-client session summary

Use display pppoe-client session summary to display summary information about a PPPoE session.
Syntax
display pppoe-client session summary [ dial-bundle-number number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dial-bundle-number number: Specifies the dialer bundle number corresponding to a PPPoE session, in
the range of 0 to 1023. If this option is not specified, this command displays summary information about
all PPPoE sessions.
Examples
# Display summary information about all PPPoE sessions.
<Sysname> display pppoe-client session summary
Bundle ID
1 1
2 1
Table 6 Command output
Field
Bundle
Interface
VA
RemoteMAC
LocalMAC
Interface VA
Eth1/1 VA0
Eth1/2 VA1
Description
Number of discarded outgoing packets.
RemoteMAC LocalMAC
00e0-1400-4300 00e0-1500-4100 SESSION
00e0-1500-4300 00e0-1600-4100 SESSION
Description
Dialer bundle to which the PPPoE session belongs.
Ethernet interface where the PPPoE session is present.
Virtual access interface created for the PPPoE session.
MAC address of the remote end.
MAC address of the local end.
35
State