Dialer Disconnect; Dialer Flow-Interval - H3C MSR Series Command Reference Manual

dialer disconnect

Use dialer disconnect to disconnect a dialup link on an interface.
Syntax
dialer disconnect [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If no interface is specified, this command disconnects all dialup links.
Examples
# Disconnect the dialup link on interface Dialer 0.
<Sysname> dialer disconnect interface dialer0

dialer flow-interval

Use dialer flow-interval to set the interval for DDR to collect traffic statistics.
Use undo dialer flow-interval to restore the default.
Syntax
dialer flow-interval interval
undo dialer flow-interval
Default
The interval for DDR to collect traffic statistics is 20 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval for DDR to collect traffic statistics, in the range of 1 to 1500 seconds.
Usage guidelines
DDR provides traffic statistics about dialup links to MP at the user-configured interval.
This command is effective only on traffic-triggered dial-in DDR.
Examples
# Set the interval for DDR to collect traffic statistics to 3 seconds.
<Sysname> system-view
141