Display Dialer - H3C MSR Series Command Reference Manual
Routers. layer 2 - wan command (v7)
Hide thumbs
Also See for MSR Series:
- Command reference manual (1187 pages) ,
- Configuration manual (80 pages) ,
- Manual (33 pages)
Table of Contents
Advertisement
Related commands
dialer-group
display dialer
Use display dialer to display the DDR-related information about an interface.
Syntax
display dialer [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If no interface is specified, this command displays the DDR-related information about all the interfaces.
Examples
# Display the DDR-related information about all the DDR interfaces.
<Sysname> display dialer
Dialer0:
Dialer Route:
NextHop: 111.111.111.111
NextHop: 222.222.222.222
Dialer number:
Dialer Timers(in seconds):
Auto-dial: 300
Idle: 120
Total Channels: 1
Free Channels: 1
Table 23 Command output
Field
Dialer0
Dialer Route:
NextHop: 111.111.111.111 Dialer
number:
123456789012345678901234567
890
Dialer number
Dialer number: 123456789012345678901234567890
Dialer number: 123456789012345678901234567890
Compete: 20
Wait-for-Carrier: 60
Description
Dialup interface: dialer or physical.
Remote IP address and dial string configured by using the dialer
route command.
Dial string for a remote IP address.
153
Enable: 5
Advertisement
Table of Contents
