Default; Description - H3C MSR Series Command Reference Manual

default

Use default to restore the default settings for a virtual PPP interface.
Syntax
default
Views
Virtual PPP interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it in a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for Virtual-PPP 10.
<Sysname> system-view
[Sysname] interface virtual-ppp 10
[Sysname-Virtual-PPP10] default

description

Use description to configure the description for a virtual PPP interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of an interface is the interface-name plus Interface. For example, the default description
of Virtual-PPP254 is Virtual-PPP254 Interface.
Views
Virtual PPP interface view
Predefined user roles
network-admin
41