H3C MSR Series Command Reference Manual page 119

Packet Session Status: Inactive
Current Roaming Status: Roaming
Network Selection Mode: Manual
Network Connection Mode: WCDMA precedence
Current Network Connection: HSDPA and HSUPA
Mobile Country Code (MCC): 460
Mobile Network Code (MNC): 00
Location Area Code (LAC): 4318
Cell ID: 25381
Radio Information:
Current Band: ANY
Current RSSI: -51 dBm
Modem Security Information:
PIN Verification: Disabled
PIN Status: Ready
Number of Retries remaining: 3
SIM Status: OK
Table 17 Command output
Field
Model
International Mobile
Subscriber Identity (IMSI)
International Mobile
Equipment Identity (IMEI)
Factory Serial Number (FSN)
Modem Status
Profile Information
Profile 1
PDP Type
Header Compression
Description
3G modem name.
IMSI string of the SIM card.
IMEI serial number of the 3G modem.
FSN of the 3G modem.
Status of the 3G modem:
•
online—The 3G modem is powered on.
•
offline—The 3G modem is powered off or in lower power mode. The cellular
interface is unavailable.
Parameter template of the 3G modem.
PDP status of the 3G modem:
•
Active—The parameter template is already configured.
•
Inactive.
•
Undefined—The parameter template is not configured yet. The cellular
interface is not available. Use the profile create command to create the
template (profile).
PDP type, displayed only when Profile 1 is Active:
•
IPv4.
•
IPv6.
•
PPP (transparent transmission).
PDP header compression mode:
•
On—Enables PDP header compression.
•
Off—Disables PDP header compression.
110