Isdn Bch-Local-Manage - H3C MSR Series Command Reference Manual

Table 13 Command output
Field
SPID Type
SPID B1
SPID B2
SPID Num
LDN
Neg State
Init State
SPID timer
SPID resend

isdn bch-local-manage

Use isdn bch-local-manage to enable local ISDN B channel management.
Use undo isdn bch-local-manage to restore the default.
Syntax
isdn bch-local-manage [ exclusive ]
undo isdn bch-local-manage
Default
Local ISDN B channel management is not enabled, and the ISDN B channel is managed by the PBX.
Views
ISDN interface view
Description
SPID type:
•
NIT—Not initial terminal mode.
•
STATIC—Static mode that has only the L3 initialization process.
•
AUTO—Dynamic mode that includes both the negotiation and the L3 initialization.
SPID information for the B1 channel on the BRI.
SPID information for the B2 channel on the BRI.
SPID value of the BRI interface. It can be a static configuration or the result of a dynamic
negotiation, both depending on the specified SPID Type.
Local dialing number
Negotiation state of the SPID:
•
SPID_UNASSIGNED—The SPID is not assigned or the SPID assignment fails.
•
ASSIGN_AWAITING_SPID—The device has initiated an auto-SPID request, but the
SPID is not assigned.
•
SPID_ASSIGNED—The PBX has finished the SPID assignment, and the device selects
one SPID.
•
ASSIGN_AWAITING_CALL_CLEAR—The PBX enters this state after receiving the
auto-SPID request when there is call.
Initialization state of the SPID:
•
INIT_NULL—No Layer 3 initialization occurs.
•
INIT_IND—The PBX issues the Layer 3 initialization.
•
INIT_PROCEEDING—The Layer 3 initialization is proceeding.
•
INIT_END—The Layer 3 initialization ends.
•
INIT_AWAITING_CALL_CLEAR—The PBX enters this state after receiving the Layer 3
initialization request when there is call.
Timeout value of the timer TSPID.
SPID message retransmission times.
71