H3C MSR Series Command Reference Manual page 125

Routers. layer 2 - wan command (v7)
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Field
Current Service Status
Current Roaming Status
Network Selection Mode
Current Network Connection
Downstream Bandwidth
Radio Information
Current RSSI (1xRTT)
Current RSSI (EVDO)
Current Voltage
PIN Verification
PIN Status
Number of Retries remaining
SIM Status
Description
Service status of the 3G modem:
Service available—The modem is providing services
correctly.
Emergency—The modem is providing limited services. The
cellular interface is unavailable.
No service—The modem cannot provide services. The
cellular interface is unavailable.
Low power—The modem is in low power mode. The
cellular interface is unavailable.
Roaming status, which can be Roaming or Home.
Network selection mode, which can be Manual or Automatic.
Current network:
No Service.
1xRTT/EVDO HYBRID.
EVDO.
1xRTT.
Unknown.
Downstream bandwidth, in bps.
Radio communication information.
Current RSSI of 1xRTT:
The RSSI ranges from –125 dBm to –75 dBm.
Unknown—No signal.
Current RSSI of EVDO:
The RSSI ranges from –120 dBm to –60 dBm.
Unknown—No signal.
Current voltage of the UIM card, in mV.
PIN authentication status:
Disabled.
Enabled.
Ready—USIM and SIM cards are normal and have no
authentication requests.
PIN Requirement—USIM and SIM cards have PIN
authentication requests.
PUK Requirement—USIM and SIM cards have PUK
authentication requests.
Remaining PIN or PUK authentication request retries.
SIM card status:
OK—The SIM card is normal.
Network Reject—The SIM card is denied access to the
network. The cellular interface is unavailable.
Not Insert—The SIM card is absent. The cellular interface is
unavailable.
116

Advertisement

Table of Contents
loading

Table of Contents