Shutdown; Standby Routing-Group - H3C MSR Series Command Reference Manual

If neither dialer nor interface-number is specified, this command clears the statistics of all the interfaces.
If only dialer is specified, this command clears the statistics of all dialer interfaces.
If both dialer and interface-number are specified, this command clears the statistics of the specified
dialer interface.
Examples
# Clear the statistics of Dialer 1.
<Sysname> reset counters interface dialer 1
Related commands
display interface dialer

shutdown

Use shutdown to shut down a dialer interface.
Use undo shutdown to bring up a dialer interface.
Syntax
shutdown
undo shutdown
Default
A dialer interface is up.
Views
Dialer interface view
Predefined user roles
network-admin
Examples
# Shut down interface Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] shutdown

standby routing-group

Use standby routing-group to enable the dynamic route backup function on a dialup interface.
Use undo standby routing-group to disable the dynamic route backup function.
Syntax
standby routing-group group-number
undo standby routing-group group-number
Default
The dynamic route backup function is disabled.
159