Ppp Ipcp Dns - H3C MSR Series Command Reference Manual

Routers. layer 2 - wan command (v7)
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Views
Interface view
Predefined user roles
network-admin
Parameters
username: Username for CHAP authentication, a case-sensitive string of 1 to 80 characters. The
username is sent to the peer for the local device to be authenticated.
Usage guidelines
To pass CHAP authentication, the username/password of one side must be the local
username/password on the peer.
Examples
# Set the username for CHAP authentication to Root on interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp chap user Root
Related commands
ppp authentication-mode chap

ppp ipcp dns

Use ppp ipcp dns to configure the primary and secondary DNS server IP addresses to be allocated in PPP
negotiation.
Use undo ppp ipcp dns to cancel the configuration.
Syntax
ppp ipcp dns primary-dns-address [ secondary-dns-address ]
undo ppp ipcp dns primary-dns-address [ secondary-dns-address ]
Default
A device does not allocate DNS server IP addresses to its peer if the peer does not request them.
Views
Interface view
Predefined user roles
network-admin
Parameters
primary-dns-address: Primary DNS server IP address to be set.
secondary-dns-address: Secondary DNS server IP address to be set.
Usage guidelines
When connected through PPP, a device can assign DNS server IP addresses to its peer during PPP
negotiation (if the peer requests).
7

Advertisement

Table of Contents
loading

Table of Contents