Display Isdn Spid - H3C MSR Series Command Reference Manual

Field
State
CES
Channel
Calling_Num[:Sub]
Called_Num[:Sub]

display isdn spid

Use display isdn spid to display SPID information on a BRI that runs the NI protocol.
Syntax
display isdn spid [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
Description
Current state of the Layer 3 link of the BRI interface:
•
NULL—No call exists.
•
CALL_INITIATED—Initiates call establishment.
•
OVERLAP_SENDING—Sends called number in overlap mode.
•
OUTGOING_CALL_PROCEEDING—Outgoing call is proceeding.
•
CALL_DELIVERED—The remote user alerting has been initiated but the
call has not been answered yet.
•
CALL_PRESENT—A call establishment request has been received but
has not yet responded.
•
CALL_RECEIVED—Call alerting has been indicated but has not yet
answered.
•
CONNECT_REQUEST—The user has answered the call and sends a
connection request.
•
INCOMING_CALL_PROCEEDING—Incoming call is proceeding.
•
ACTIVE—The user has received an indication that the remote user has
answered the call.
•
DISCONNECT_REQUEST—Sends a request to clear the end-to-end
connection.
•
DISCONNECT_INDICATION—Indicates that the network has
disconnected the end-to-end connection.
•
SUSPEND_REQUEST—Sends a request to suspend the call.
•
RESUME_REQUEST—Sends a request to resume a previously suspended
call.
•
RELEASE_REQUEST—Sends a request to release.
•
OVERLAP_RECEIVING—Receives additional call information in overlap
mode.
Connection endpoint suffix that indentifies a connection between the
Q.931 and Q.921 protocol.
ISDN B channel bitmap for the call.
Each bit represents a B channel in the bitmap. If the value of the bit is 1, the
B channel is used.
Calling number: calling sub-address.
Called number: called sub-address.
69