Ppp And Mp Commands; Ppp Commands; Display Ip Pool - H3C MSR Series Command Reference Manual

PPP and MP commands

This feature is supported only on routers installed with SAE, AS, ASE, BS, E1, E1-F, T1, T1-F, POS, CPOS,
CE3, or AM interface modules. For more information about interface modules, see H3C MSR Series
Routers Interface Module Manual.

PPP commands

display ip pool

Use display ip pool to display address pools.
Syntax
display ip pool [ pool-name ] [ group group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pool-name: Specifies an address pool by its name, a case-sensitive string of 1 to 31 characters.
group group-name: Displays address pools in a group specified by its name, a case-sensitive string of 1
to 31 characters.
Usage guidelines
If you do not specify any parameters, this command displays brief information about all address pools.
If you specify an address pool, this command displays detailed information about the specified address
pool.
Examples
# Display brief information about all address pools.
<sysname> display ip pool
Group name: a
Pool name
aaa1
aaa2
Group name: b
Pool name
bbb
# Display brief information about the address pools in the group a.
<sysname> display ip pool group a
Start IP address
1.1.1.1
1.1.1.6
Start IP address
1.1.2.1
2.2.2.1
1
End IP address
1.1.1.5
1.1.1.10
End IP address
1.1.2.5
2.2.2.5
Free In use
5 0
5 0
Free In use
4 1
5 0