Display Interface Dialer - H3C MSR Series Command Reference Manual

Field
Dialer Timers(in seconds):
Auto-dial: 300
Enable: 5
Idle: 120
Total Channels
Free Channels

display interface dialer

Use display interface dialer to display information about a dialer interface.
Syntax
display interface [ dialer ] [ brief [ description | down ] ]
display interface [ dialer [ interface-number ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
mdc-operator
Parameters
interface-number: Existing dialer interface number.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in physically Down state and the causes. If you do not
specify this keyword, this command displays information about interfaces in all states.
description: Displays the complete interface description. Without this keyword, this command displays
only the first 27 characters of a description if the description contains more than 27 characters.
Usage guidelines
If you do not specify the dialer keyword, this command displays information about all interfaces on the
device.
If you specify the dialer keyword without the interface-number argument, this command displays
information about all the dialer interfaces.
Examples
# Display detailed information about interface Dialer 1.
<Sysname> display interface dialer 1
Description
DDR timers in seconds:
•
•
Compete: 20
•
Wait-for-Carrier: 60
•
•
Total number of channels on the interface.
Number of free channels.
Auto-dial—Autodial timer set by the dialer timer autodial
command.
Compete—Compete-idle timer set by the dialer timer compete
command.
Enable—Link holddown timer set by the dialer timer enable
command.
Idle—Link idle-timeout timer set by the dialer timer idle command.
Wait-for-Carrier—Wait-carrier timer set by the dialer timer
wait-carrier command.
154