Isdn Carry Calling-Name - H3C MSR Series Command Reference Manual

Default
No calling number is carried in messages that a calling party transmits.
Views
ISDN interface view
Predefined user roles
network-admin
Parameters
calling-number: Specifies the calling number, a case-insensitive string of 1 to 24 characters..
Usage guidelines
After the calling party sends the calling number to the called party, the called party can see the calling
number through the display isdn call-info command. If the called party has configured the isdn
caller-number command, it will check the calling number sent from the calling party.
After you execute this command, the calling number can be sent to the called party only if the PBX
includes the calling number.
Examples
# Configure the message from a calling party to a called party on BRI 2/0 to carry the calling number.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn calling 8060170
Related commands
display isdn call-info
•
isdn caller-number
•

isdn carry calling-name

Use isdn carry calling-name to configure ISDN to include the calling-name field in outgoing packets on
an ISDN interface.
Use undo isdn carry calling-name to restore the default.
Syntax
isdn carry calling-name
undo isdn carry calling-name
Default
ISDN does not include the calling-name field in outgoing packets.
Views
ISDN interface view
Predefined user roles
network-admin
Usage guidelines
After you execute this command on the calling party, the called party can see the name of the calling
party.
75