Modem Answer-Timer - H3C MSR Series Command Reference Manual

<Sysname> system-view
[Sysname] interface analogmodem 2/0
[Sysname-Analogmodem2/0] country-code china

modem answer-timer

Use modem answer-timer to set the answer timeout timer for establishing a dial-up connection.
Use undo modem answer-timer to restore the default.
Syntax
modem answer-timer time
undo modem answer-timer
Default
The answer timeout timer is 60 seconds.
Views
User line view
Predefined user roles
network-admin
Parameters
time: Sets the answer timeout timer in the range of 1 to 65535 seconds.
Usage guidelines
The answer timeout timer sets the amount of time that the modem will wait for a call to establish. When
the timer expires, the modem disconnects the call.
If the modem is on the calling party side, the timer starts when the modem starts to dial.
•
• If the modem is on the called party side, the timer starts when the modem goes off hook.
This command is available on the following user lines:
• TTY lines for the following interfaces:
AM interface
Asynchronous serial interface
Asynchronous/synchronous serial interface operating in asynchronous mode
AUX line
•
This command is not available on the console or VTY lines.
To display the user line for an interface, use the display line command.
Examples
# Set the answer timeout timer to 50 seconds.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] modem answer-timer 50
100