Isdn L3-Timer - H3C MSR Series Command Reference Manual

# Send setup messages without the sending complete information element on BRI 2/0.
[Sysname-Bri2/0] isdn ignore sending-complete outgoing
Related commands
isdn protocol-type

isdn l3-timer

Use isdn l3-timer to set the timeout value of an ISDN L3 timer.
Use undo isdn l3-timer to restore the default.
Syntax
isdn l3-timer timer-name time-interval
undo isdn l3-timer { timer-name | all }
Default
Table 14 lists the defaults of the DSS1 ISDN L3 timers. For the defaults of the L3 timers in any other ISDN
protocol, perform the display isdn parameters command.
Views
ISDN interface view
Predefined user roles
network-admin
Parameters
timer-name: Specifies an ISDN L3 timer by its name.
time-interval: Specifies the timeout value of an ISDN L3 timer.
all: Restores default timeout values of all the L3 timers.
Table 14 DSS1 ISDN L3 timers
timer-name
t301
t302
t303
t304
t305
t308
t309
t310
t313
t322
Timer name Value range (in seconds)
T301 30 to 1200
T302 1 to 60
T303 2 to 10
T304 10 to 60
T305 4 to 30
T308 2 to 10
T309 1 to 240
T310 10 to 240
T313 2 to 10
T322 2 to 10
81
Default (in seconds)
240
15
4
30
30
4
90
40
4
4