Description - H3C MSR Series Command Reference Manual

This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings of interface Virtual-Template 10.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] default
# Restore the default settings of interface MP-group 3.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-Mp-group3] default

description

Use description to set the description for a VT or MP-group interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description for a VT or MP-group interface is interface name Interface (for example,
Virtual-Template1 Interface or MP-group3 Interface).
Views
VT interface view, MP-group interface view
Predefined user roles
network-admin
Parameters
text: Specifies the interface description, a case-sensitive string of 1 to 255 characters.
Examples
# Set the description for interface Virtual-Template 10 to virtual-interface.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] description virtual-interface
# Set the description for interface MP-group 3 to mpgroup-interface.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-MP-group3] description mpgroup-interface
14