H3C MSR Series Command Reference Manual page 122

Routers. layer 2 - wan command (v7)
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Packet Session Status: Active
Network Information:
Current Service Status: Service available
Network Selection Mode: Automatic
Network Connection Mode: TD-SCDMA precedence
Current Network Connection: HSDPA
Mobile Network Name: CHINA MOBILE
Downstream Bandwidth: 2800000 bps
Radio Information:
Current RSSI: -75 dBm
Modem Security Information:
PIN Verification: Disabled
PIN Status: Ready
Number of Retries remaining: 3
SIM Status: OK
Table 18 Command output
Field
Model
International Mobile
Subscriber Identity (IMSI)
International Mobile
Equipment Identity (IMEI)
Factory Serial Number (FSN)
Modem Status
Profile Information
Profile 1
PDP Type
Header Compression
Data Compression
Description
3G modem name.
IMSI string of the SIM card.
IMEI serial number of the 3G modem.
FSN of the 3G modem.
Status of the 3G modem:
online—The 3G modem is powered on.
offline—The 3G modem is powered off or in lower power mode. The cellular
interface is unavailable.
Parameter template of the 3G modem.
PDP status of the 3G modem:
Active—The parameter template is already configured.
Undefined—The parameter template is not configured yet. The cellular
interface is not available. Use the profile create command to create the
template (profile).
PDP type, displayed only when Profile 1 is Active:
IPv4.
IPv6.
PPP (transparent transmission).
PDP header compression mode:
On—Enables PDP header compression.
Off—Disables PDP header compression.
PDP data compression mode:
On—Enables PDP data compression.
Off—Disables PDP data compression.
113

Advertisement

Table of Contents
loading

Table of Contents