Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
4.2.10 Configuring NAT/FW Tunnel Traversal
Table 4-22 NAT/FW tunnel traversal configuration
Step
Configuration on the public LS
1
2
3
4
5
6
Configuration
task
Configure the
Ethernet
Select [System View/Location Server] in the
interface used
navigation tree, and set the interface name
for the
correctly in the configuration window.
communication
Command: ls-config (LS view)
between the
LS and the PS
Configure the
Select [System View/Location Server] in the
port used for
navigation tree, and set the port correctly in
the
the configuration window.
communication
between the
Command: ls-config (LS view)
LS and the PS
Select [System View/Location Server] in the
navigation tree, and set both the SIP and
Configure the
H323 call mode to routed mode in the
call mode
configuration window.
Command: call-mode (LS view)
Select [System View/Location Server] in the
navigation tree, and
Select the [Start/Stop] check box in the
Start the LS
configuration window to start the LS.
Clear this check box to stop the LS.
Command: start (LS view)
1)
2)
3)
Configure the
domain name
You can click <Add> in the [Add List Item]
dialog box to batch add domain
identifications.
Command: domain (LS view)
1)
Configure the
domain
2)
attribute
Command: attribute (LS-DOMAIN view)
Chapter 4 XE IP PBX Configuration
Description
Select
[System
Server/Domain] in the navigation tree.
Click
<Add>
in
the
window.
Set the domain name correctly in the
[Add List Item] dialog box.
Select
[System
Server/Domain/the
configured] in the navigation tree.
Set the domain attribute correctly in the
configuration window.
4-35
Remarks
Required
Required
Required
Required
View/Location
configuration
Required
View/Location
domain
to
be
Required
Advertisement
Table of Contents
