Standby Routing-Group Rule - H3C MSR Series Command Reference Manual

Views
Dialup interface view
Predefined user roles
network-admin
Parameters
group-number: Dynamic route backup group number in the range of 1 to 255.
Usage guidelines
Before enabling the dynamic route backup function on a dialup interface, make sure DDR is enabled on
the interface.
Examples
# Enable the dynamic route backup function on interface BRI 3/0.
<Sysname> system-view
[Sysname] interface bri 3/0
[Sysname-Bri3/0] standby routing-group 1

standby routing-group rule

Use standby routing-group rule to create a dynamic route backup group or add a network segment to be
monitored to the group.
Use undo standby routing-group rule to remove a dynamic route backup group or remove a network
segment being monitored from the group.
Syntax
standby routing-group group-number rule ip ip-address { mask | mask-length } [ vpn-instance
vpn-instance-name ]
undo standby routing-group group-number rule [ ip ip-address { mask | mask-length } ] [ vpn-instance
vpn-instance-name ]
Default
No dynamic route backup group is created.
Views
System view
Predefined user roles
network-admin
Parameters
group-number: Dynamic route backup group number in the range of 1 to 255.
ip ip-address: Specifies the IP address of the network segment to be monitored.
mask: Network mask.
mask-length: Network mask length in the range of 0 to 32.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance name, a case-sensitive string of 1 to
31 characters.
160