Default - H3C MSR Series Command Reference Manual

Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth

Default

The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
VT interface view, MP-group interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the link costs in OSPF, OSPFv3, and IS-IS. For more
information, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth of VT interface 10 to 1000 kbps.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] bandwidth 1000
# Set the expected bandwidth of MP-group interface 3 to 1000 kbps.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-MP-group3] bandwidth 1000
default
Use default to restore the default settings for a VT or MP-group interface.
Syntax
default
Views
VT interface view, MP-group interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command before using it on a live network.
13