Ddr Commands; Bandwidth; Default - H3C MSR Series Command Reference Manual

DDR commands

bandwidth

Use bandwidth to configure the expected bandwidth of an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth

Default

The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
Dialup interface (physical interface or dialer interface) view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the link costs in OSPF, OSPFv3, and IS-IS. For more
information, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth of dialer interface 1 to 100 kbps.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] bandwidth 100
default
Use default to restore the default settings for a dialer interface.
Syntax
default
Views
Dialer interface view
Predefined user roles
network-admin
Usage guidelines
133