Dm-Port Open - H3C MSR Series Command Reference Manual

RX: 0 packets, 0 errors
PPP channel 0 traffic statistics:
TX: 0 packets, 0 errors
RX: 0 packets, 0 errors
Table 20 Command output
Field
Cellular 0/0
Current state
Description
Modem status
DM port status
Capability:
1 Control channel, 1 PPP channel
Control channel 0 traffic statistics:
TX: 0 packets, 0 errors
RX: 0 packets, 0 errors
PPP channel 0 traffic statistics
TX: 0 packets, 0 errors
RX: 0 packets, 0 errors
Related commands
reset counters controller cellular

dm-port open

NOTE:
Support for DM depends on the modem model.
Use dm-port open to enable DM on a 3G modem.
Description
Status of the interface:
•
Administratively DOWN—The interface is administratively
down, which means the interface has been shut down by using
the shutdown command.
•
DOWN—The interface is administratively up, but the physical
status of the interface is down (probably because there is no
physical link or the link has failed).
•
UP—Both the management status and physical status of the
interface are up.
Description of the interface.
Status of the USB 3G modem:
•
Present—The modem is present.
•
Absent—The modem is absent.
DM status:
•
Enabled—DM is enabled.
•
Disabled—DM is disabled.
Type and number of channels the cellular interface supports:
•
1 Control channel—Supports one control channel.
•
1 PPP channel—Supports one asynchronous serial sub-channel.
Control channel statistics:
•
TX: 0 packets, 0 errors—Number of packets and number of
error packets sent through the control channel.
•
RX: 0 packets, 0 errors—Number of packets and number of
error packets received through the control channel.
PPP channel statistics:
•
TX: 0 packets, 0 errors—Number of packets and number of
error packets sent through the PPP channel.
•
RX: 0 packets, 0 errors—Number of packets and number of
error packets received through the PPP channel.
118