Display Controller Cellular - H3C MSR Series Command Reference Manual

Related commands
mode cdma
•
mode td-scdma
•
• mode wcdma
pin modify
•
pin unlock
•
pin verification enable
•
pin verify
•
• plmn select
profile create
•

display controller cellular

Use display controller cellular to display information about a cellular interface.
Syntax
display controller [ cellular [ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies a cellular interface by its number.
Usage guidelines
If the cellular keyword is not specified, the command displays information about all interfaces of the
device.
If the cellular keyword is specified but the interface-number argument is not specified, the command
displays information about the existing cellular interface.
Hot swapping a USB 3G modem clears the cellular interface statistics.
Examples
# Display information about Cellular 0/0.
<Sysname> display controller cellular 0/0
Cellular0/0
Current state: UP
Description: Cellular0/0 Interface
Modem status: Present
DM port status: Disabled
Capability:
1 Control channel, 1 PPP channel
Control channel 0 traffic statistics:
TX: 0 packets, 0 errors
117