H3C MSR Series Command Reference Manual page 120

Field
Data Compression
Packet Session Status
Diagnostics Monitor
Current Service Status
Current Service
Packet Service
Current Roaming Status
Network Selection Mode
Network Connection Mode
Current Network Connection
Description
PDP data compression mode:
•
On—Enables PDP data compression.
•
Off—Disables PDP data compression.
Packet session status:
•
Active—The 3G Modem is transmitting data through PPP.
•
Inactive—The 3G modem is physically down.
DM monitoring status:
•
Open—DM is enabled.
•
Close—DM is disabled.
Service status of the 3G modem:
•
Service available—The modem is providing services correctly.
•
Emergency—The modem is providing limited services. The cellular interface
is unavailable.
•
No service—The modem cannot provide services. The cellular interface is
unavailable.
•
Low power—The modem is in low power mode. The cellular interface is
unavailable.
Current service type:
•
Circuit-switched—Serves for the CS domain only.
•
Packet-switched—Serves for the PS domain only.
•
Combined—Serves for both the CS and PS domains.
•
Invalid—Invalid service.
PS domain attach/detach status of the 3G modem, which can be detached (the
cellular interface is unavailable) or attached.
Roaming status, which can be Roaming or Home.
Network selection mode, which can be Manual or Automatic.
Network connection mode:
•
WCDMA only—Connected to the WCDMA network only.
•
WCDMA precedence—Connected to the WCDMA network with preference.
•
GSM only—Connected to the GSM network only.
•
GSM precedence—Connected to the GSM network with preference.
Current network:
•
No Service.
•
GSM.
•
GPRS.
•
EDGE.
•
WCDMA.
•
HSDPA.
•
HSUPA.
•
HSDPA and HSUPA.
•
HSPA+.
•
Unknown.
111