Table of Contents
Advertisement
Upgrading restrictions and guidelines
None.
Hardware feature updates
None.
Software feature and command updates
None.
MIB updates
None.
Operation changes
None.
Restrictions and Cautions
1.
Some Intel NICs do not support 802.11ax. For more information, access the Intel official
website at
https://www.intel.cn/content/www/cn/zh/support/articles/000054799/network-and-io/wireless-n
etworking.html.
2.
The value of the
was changed to be the same as the actual port sequence number.
3.
You do not have the privilege to execute commands after logging in to an AP through Telnet,
and you must restore the default settings of the AP when the following conditions are met:
1) The AP operates in fit AP mode and the running configuration has been saved on the AP.
2) You upgrade the software version of the AP from a version earlier than 2442 to 2442 or a
later version.
Workaround: Clear the configuration saved on the AP before upgrading.
Open problems and workarounds
1.
When both WPA and WPA2 are configured, clients might fail to come online. Do not configure
WPA.
port-number
argument in the
poe port
3
command in WA6330 AP view
Advertisement
Table of Contents
